Milwaukee 4204-1 7.2 Amp Electromagnetic Drill Press with 1/2-Inch Motor and Chuck

Milwaukee 4204-1 7.2 Amp Electromagnetic Drill Press with 1/2-Inch Motor and Chuck Review

Milwaukee 4204-1 7.2 Amp Electromagnetic Drill Press with 1/2-Inch Motor and Chuck Feature

• 7.2 amp motor
• 1/2" drill capacity
• 600 RPM no load speed
• Solid state electronic switching
• Feedback speed control

This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 9in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Amps: 7.2, Speed (RPM): 600, Drilling Capacity (in.): 1/2, Chuck Size (in.): 1/2

Motor Guard E-4000S Stripe Eliminator System

Motor Guard E-4000S Stripe Eliminator System Review

Motor Guard E-4000S Stripe Eliminator System Feature

• Quickly and cleanly removes pin stripes and adhesives.
• Won't damage clear coat
• Universal hardware fits all popular air and electric tools
• Reformulated for waterborne finishes
• Made in U.S.A.

STRIPE ELIMINATOR

Aviditi CMC25 Capacitor, 30 Microfarad, 370-Volt, Round

Aviditi CMC25 Capacitor, 30 Microfarad, 370-Volt, Round Review

Aviditi CMC25 Capacitor, 30 Microfarad, 370-Volt, Round Feature

• Motor run capacitor
• Robust case
• Self healing
• Internally protected
• UL, CSA recognized

This motor run capacitor has 2 contacts, each with 4 terminals. It is UL and CSA recognized. This capacitor helps make motors run more efficient.

Motor Guard AP-2 Ultimate Sanding Blocks (Assorted 6-Pack)

Motor Guard AP-2 Ultimate Sanding Blocks (Assorted 6-Pack) Review

Motor Guard AP-2 Ultimate Sanding Blocks (Assorted 6-Pack) Feature

• Six innovative and productive sanding blocks.
• With a quality block for every application from fast cutting to color sanding the Motor Guard ultimate sanding block collection is the one-stop finishing solution
• Users of these unique Sanding Blocks report reduced paint prep times, reduced material consumption and increased paint department productivity.
• Also ideal for woodworking and home improvement.
• Made in U.S.A.

AP-2 - MOTOR GUARD - The Soft Block® (SB-1) features two different densities for the ultimate sanding of curved or irregular surfaces while the Block Buster® (HT-1), with its unique hole side, provides for aggressive hard block sanding. The Memory Block® (MB-1) offers another double-sided block with a dense "memory" foam that conforms to irregular surfaces with little pressure. For maximum gripping power on the toughest applications, the Wonder Block® (WB-1) is ideal on flat or slightly curved surfaces. The Rocker Block® (RK-1) and the Roller Block® (RL-1) both feature a soft and pliable outer layer for superior finish and a non-slip grip of abrasive sheets plus a rigid inner layer to prevent the transfer of finger marks. The Rocker Block fits a standard 6" PSA disc for dry sanding while the Roller Block uses a folded sheet and is the ultimate wet sanding block. Users of these unique blocks report reduced paint prep times, lower material costs and increased paint department productivity.

Fasco FM55 5.5" Blower Motor Belly Band Bracket NEW

Fasco FM55 5.5" Blower Motor Belly Band Bracket NEW Review

Fasco FM55 5.5" Blower Motor Belly Band Bracket NEW Feature

• For use with 5.5" diameter Direct Drive Blower Motors
• Grommets and eyelets included

Fasco FM55 5.5" Blower Motor Belly Band Bracket NEW

Miller 223169 Circuit Card Assy,Motor Control 8Vs 850 Ipm

Miller 223169 Circuit Card Assy,Motor Control 8Vs 850 Ipm Review

Miller 223169 Circuit Card Assy,Motor Control 8Vs 850 Ipm

Mars Motors 10585 1/3HP, 115v Furnace Blower Motor (AO Smith DL1036, EMR 1864, Fasco D727, Marathon X002, Wagner WG840585, Packard 43585, Source 1 S1-FHM3586, Prostock 51-24435-85, RCD P257-8585, Partner's Choice 0-0170)

Mars Motors 10585 1/3HP, 115v Furnace Blower Motor (AO Smith DL1036, EMR 1864, Fasco D727, Marathon X002, Wagner WG840585, Packard 43585, Source 1 S1-FHM3586, Prostock 51-24435-85, RCD P257-8585, Partner's Choice 0-0170) Review

Mars Motors 10585 1/3HP, 115v Furnace Blower Motor (AO Smith DL1036, EMR 1864, Fasco D727, Marathon X002, Wagner WG840585, Packard 43585, Source 1 S1-FHM3586, Prostock 51-24435-85, RCD P257-8585, Partner's Choice 0-0170) Feature

• Durable 1/3 Horsepower furnace blower motor
• Includes resilient rings for mounting base
• Use to replace blower for other popular models

Mars Motors 10585 1/3HP, 115v 1075rpm, 3 Speed, 6.1 amp Furnace Blower Motor. Dimensions 4.00 x 5.14 x 1/2 MARS Direct Drive Furnace Blower Motors are 3 speed standard efficiency models. All models are electrically reversible and include 2-1/4" resilient rings for base mounting. These models have all angle sleeve bearings and have open air over enclosures. REQUIRES 5/370 Capacitor (Mars 12905). REPLACES: AO Smith DL1036 EMR 1864 Fasco D727 Marathon X002 Wagner WG840585 Packard 43585 Source 1 S1-FHM3586 Prostock 51-24435-85 RCD P257-8585 Partner's Choice 0-0170

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8" Diameter x 2" Depth Capacity

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8" Diameter x 2" Depth Capacity Review

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8" Diameter x 2" Depth Capacity Feature

• 120V, 10.2 amp magnetic-base drill press with 1.6 horsepower (HP) 1200 watt single-phase motor weighs 27 lb.
• 1-5/8" maximum cutting diameter and 2" maximum cutting depth
• 1810 lb. magnet dead lift and 1096 lb. drill point breakaway on 1" thick steel
• Stationary motor ensures the working height remains constant
• Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments

The Jancy USA-101 240V, 5.7 amp portable magnetic-base drill press is a good choice for fabricating in confined spaces, has a 1-1/2” maximum cutting diameter, a 2” maximum cutting depth, an internal chamber that delivers coolant through the arbor, and an electromagnet with a dead lift of 1480 lb. and a drill point breakaway of 650 lb. on 1” thick steel when drilling holes 1-1/16” diameter and larger. Safety features prevent the drill from turning on if the magnetic field is not strong enough to hold the drill, and turn on a warning light when the magnetic field drops to an unsafe level. A safety strap is designed to prevent the drill from falling if power to the magnet is interrupted, and a chip guard controls chips. For customization, a 3-spoke handle can be mounted on either side of the press. The drill press accommodates annular cutters with a 3/4" shank, and can be converted to hold a 1/2” capacity drill chuck (all sold separately).

The Jancy USA-101 240V portable magnetic-base drill has a 1.75 horsepower (HP) 1380 watt single-phase motor. The drill is 17-3/4 x 8 x 13-1/2 inches (H x W x D) and it weighs 29 lb. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

Magnetic drill presses are used in steel fabrication industries to drill holes in steel where it is necessary to move the drill to the workpiece, such as ship and bridge building. They are portable and have a magnetic base that secures the drill to the steel workpiece, allowing the drill to be mounted vertically, from either the top or bottom of the workpiece, or horizontally on the side of the workpiece. They are usually used with annular cutters, though some can be converted to hold a chuck with drill bits or with threading taps. Magnetic drill presses are given two numbers that signify the strength of the magnetic field. Magnet deadlift signifies the amount of force it takes to lift the drill off 1” thick steel when the magnet is turned on. Drill point breakaway is the amount of force it takes the drill bit to push the drill off 1” thick steel when the drill is in operation. Generally, higher numbers indicate that the press can exert more force on the workpiece.

Jancy Engineering manufactures Slugger portable magnetic drills and annular cutters, as well as metal working equipment for the fabrication trade. The company, founded in 1957 and headquartered in Davenport, IA, makes tools that meet American National Standards Institute (ANSI) standards.

What’s in the Box?

• Jancy USA-101 240V magnetic drill press
• Carrying case
• Safety strap
• Handle with 3 spokes
• 3/16” pilot pins: 1” and 2” depths of cut
• 1/4” pilot pins: 1” and 2” depths of cut
• Hardware
• Hex keys: 3, 4, and 5 mm
• 5 mm T-handle wrench
• 10 mm combination wrench
• Instructional DVD
• Instructions

Dc Motor, 0.5V

Dc Motor, 0.5V Review

Dc Motor, 0.5V Feature

• Simple, Compact
• Provides the ideal power source for classroom electrical and construction activities
• Runs on 4.5V or 6.0V DC current
• Use with One-Hand Generator
• Includes lead wires

AMEP Classroom Power Source - 4.5V to 6V DC Motor